Genuine Nissan replacement thermostat gasket.
Nissan OEM Rear Timing Cover Oil Gallery Gasket, Lower Small. Product # 13533-JK21BReplaces # 13533-JK20B
Nissan OEM Rear Timing Cover Oil Gallery Gasket, Upper Large.
Nissan OEM VTC Solenoid Cover Gasket, LH.
Nissan OEM VTC Variable Timing Control Solenoid Gasket RH.
OEM Nissan Valve Cover Gaskets fit all Nissan models equipped with a VQ37VHR powertrain. Nissan Recommends changing spark plugs at 60,000 and 105,000 miles.
OEM Nissan Valve Cover Gaskets fit all Nissan models equipped with a VQ37VHR powertrain. Nissan Recommends changing spark plugs at 60,000 and 105,000 miles.
Right 0.030" MLS Head Gasket (C4592-030) by Cometic Gasket®. Position: Right. Bore Diameter: 3 5/6" (97mm). Material: Multi-layer stainless steel. Thickness: 0.030". The Cometic...
Left 0.030" MLS Head Gasket (C4593-030) by Cometic Gasket®. Position: Left. Bore Diameter: 3 5/6" (97mm). Material: Multi-layer stainless steel. Thickness: 0.030". The Cometic...
OEM Upper to Lower Intake Manifold Gasket by Nissan. Product # 14032-JK21AReplaces # 14032-JK20A
Genuine Nissan OEM Throttle to Plenum Gasket.
Nissan OEM PCV O-Ring Seal Gasket - Nissan 350Z 370Z.
SEAL-OIL LEVEL GAUGE GUIDE is Lookup Code 15148 in the diagram.
Nissan OEM Head Gasket Set, VQ37VHR - Nissan 370Z.
This Nissan approved Liquid Gasket is used for: Oil Pan, Thermostat, Oil Pump, and Valve Covers.
Those rebuilding their VQ37VHR have probably realized that it's impossible to get replacement gaskets for the oil gallery plates on the rear timing chain cover, as Nissan only...
Product # 11026-JA00AReplaces # 11026-01M00, 11026-01M02
This kit includes all of the O-rings and gaskets that need to be replaced when the timing system is pulled apart for service. We also produce our own heavy-duty rear oil gallery...
O-RING is Lookup Code 27070VF in the diagram.
Nissan OEM PCV O-Ring Seal Gasket - Nissan 350Z 370Z.
3 Required Per Intake Cam, 6 Required Per Vehicle. Product # 13042-3HD0AReplaces # 13042-6N200
350z HR Nissan OEM Coolant Water Inlet Pipe Gasket RH.
These are OEM replacement seals for the front crankshaft. If you have a KJR pulley and purchasing a UR pulley for the leak fix, this is the seal required. Product #...
These gasket go between the lower intake manifold and heads. 2 are required per vehicle.