Interior parts for Datsun 240Z, 260Z and 280Z. Many OEM genuine Nissan parts as well as one off reproductions available. Dash covers available in caps and full front covers. OEM parts will be designated as "OEM" in the title. Replacement door panels for 240Z and 77-78 280Z in original look and sport/race style metal door panels for all years. New seat belt kits for replacing the old originals to keep your car safe. We also carry a large selection of used parts which are not all on the website, so please contact us for unusual parts that are not listed.
New replacement (windshield mount) rear view mirror for 1970-83 Datsun 240Z/260Z/280Z/280ZX , 510. This mirror mounts to the windshield with special adhesive (not included)....
3M Yellow Super Trim Adhesive. 19oz aerosal can. Glue for attaching interior materials. Exceptional bond strength. Heat and moisture resistant. Bonds heavyweight automotive...
New #8 X 3/4" long screws with washers for interior trim. Interior trim screws for Datsun 240Z, 260Z and 280Z, 1970-78. These work for the rear hatch "vent" trim piece &...
New light bulb for Datsun 240Z 260Z 280Z 280ZX 510 and roadster , 1965-83. This bulb has 2 flat prongs and is about 3/4" tall. We also have available the tiny bulbs that look...
New 12V power outlet/lighter. Includes mounting bracket & wiring. Can be mounted anywhere inside the car for 12V auxiliary power. Will fit all vintage Datsuns.
New window crank handle with retainer. Will fit 1970-78 240Z, 260Z, 280Z, and 510, right or left side. Includes retaining clip. Choose from OEM Nissan or aftermarket. *Notice...
New window crank handle with retainer. Will fit 1970-78 240Z, 260Z, 280Z, and 510, right or left side. Includes retaining clip. Choose from OEM Nissan or aftermarket. *Notice...
Datsun 240Z, 260Z and 280Z dome light. New OEM Genuine Nissan dome light assembly. Includes bulb. Made in Japan, factory Nissan part.
One new OEM genuine Nissan clutch and brake pedal clevis pin. This will fit 1973-78 Datsun 240Z, 260Z, and 280Z. This pin goes on the top of the brake and clutch pedals where...
Datsun 240Z, 260Z, and 280Z door handle cup. New OEM Genuine Nissan interior door handle plastic insert. Will fit 1970-78 Datsun 240Z, 260Z, and 280Z. Choose from left or right.
Datsun 240Z, 260Z, and 280Z door handle cup. New OEM Genuine Nissan interior door handle plastic insert. Will fit 1970-78 Datsun 240Z, 260Z, and 280Z. Choose from left or right.
Datsun 240Z door handle strap. New OEM Genuine Nissan passenger side interior door pull handle for Datsun 240Z 1970-73.
New Genuine Nissan OEM wood shift knob. This wood knob will fit Datsun 240Z, 260Z, and 280Z, 1970-78. This shift knob we still get from Nissan. High quality as would be expected...
New door panel lock pull grommet. Choose aftermarket or OEM Genuine Nissan. Will fit Datsun 240Z, 260Z & 280Z cars 1970-78. Sold individually.
New door panel lock pull grommet. Choose aftermarket or OEM Genuine Nissan. Will fit Datsun 240Z, 260Z & 280Z cars 1970-78. Sold individually.
New OEM genuine Nissan choke lever. This choke knob will fit 1970-71 Datsun 240Z, Series 1.
Datsun 240Z, 260Z, and 280Z pedal rubber. New OEM Genuine NIssan foot rest pad rubber for 1970-78 Datsun 240Z, 260Z, and 280Z.
New OEM genuine Nissan auto trans brake pedal pad. This rubber pedal pad will fit 1970-83 Datsun 240Z, 260Z, 280Z and 280ZX.
Datsun 240Z door panel clips. Ten new oem door panel metal clips for Datsun 240Z and 510 1970 to 1973. These clips hook into the door panels and hold the door panel to the door....
Datsun 240Z door panel inserts. Pack of ten new OEM genuine Nissan door panel cup inserts for 1970-1973 Datsun 240Z and 510. These inserts go into the metal door and the door...
New door lock knob pull. This will fit Datsun 240Z, 260Z, and 280Z, 1970-78. Choose from OEM Nissan part or aftermarket. Both are black plastic.
New door lock knob pull. This will fit Datsun 240Z, 260Z, and 280Z, 1970-78. Choose from OEM Nissan part or aftermarket. Both are black plastic.
Datsun 240Z, 260Z, and 280Z door sill plate. New OEM Genuine Nissan outer sill "kick" plate. Will fit 1970-78 Datsun 240Z, 260Z, and 280Z 2-seater. Right or left side.
Pack of 10 new black colored interior push in rivet clips for 1970-78 Datsun 240Z, 260Z, and 280Z cars. These rivets are used on plastic interior panels to hold the panels to...
Accelerator pedal or bell crank bushings for Datsun 1970-78 240Z, 260Z, 280Z and 510. These plastic bushings will fit in the accelerator pedal and in the accelerator linkage...
New OEM genuine Nissan heater control knob set for 1974-78 Datsun 260Z and 280Z. Includes 3 new knobs.
New OEM Genuine Nissan shifter boot seal. This is the smaller round boot seal that attaches to the transmission at the base of the shifter. Will fit Datsun 240Z, 260Z, 280Z, and...
New OEM Genuine Nissan shift boot for 1965-70 Datsun Roadster.
New OEM Genuine Nissan steering wheel horn button pad. This horn pad will fit Datsun 240Z and 510, 1970-1973. This pad is approx 4" in diameter.
New OEM genuine Nissan door drain/vent. These rubber door drains will fit Datsun 510 and 280ZX. These rubbers fit in the bottom of the door, two per side. Sold as singles.
New OEM genuine Nissan 5-speed shift knob in black with a "leather" look. Will fit Datsun Z-car 5-speed transmission with M8 X 1.25 metric threads found in Datsun 240Z, 260Z,...
New retainer for the door lock cylinders. This clip will fit 1970-78 Datsun 240Z, 260Z, 280Z and 510. These clips are required to hold the door lock cylinders in the door....
New retainer for the door lock cylinders. This clip will fit 1970-78 Datsun 240Z, 260Z, 280Z and 510. These clips are required to hold the door lock cylinders in the door....
New OEM Genuine Nissan dash screw cover in black. This plastic cover will fit Datsun 280ZX, 1979-83. Dash requires four of these screw covers.
New window crank retainer clip. This window crank retainer will fit 1970-78 Datsun 240Z, 260Z, 280Z and 68-73 510. This is a very thin clip that will not interchange with most...
New window crank retainer clip. This window crank retainer will fit 1970-78 Datsun 240Z, 260Z, 280Z and 68-73 510. This is a very thin clip that will not interchange with most...
New OEM genuine Nissan door pin switch for 1970-78 Datsun 240Z, 260Z, and 280Z. This switch installs in the front door jamb and triggers when the door is opened. Activates the...
Datsun 280Z center console. New OEM Genuine Nissan center console. Will fit Datsun 260Z and 280Z, 1974-78. Black color. Has provision for choke handle if needed.
New inner sill plate. This door sill will fit Datsun 240Z and 260Z (early) 1970-74 left and right sides. These threshold plates original are matt black textured finish.
New inner sill plate. This door sill will fit Datsun 240Z and 260Z (early) 1970-74 left and right sides. These threshold plates original are matt black textured finish.
New inner sill plate. This door sill will fit Datsun 240Z and 260Z (early) 1970-74 left and right sides. These threshold plates original are matt black textured finish.
New Genuine Nissan interior door handle cup insert for Datsun 280ZX, 79-83. Will fit right or left side.
New OEM Genuine Nissan black visor clip for Datsun 280ZX, 1979-83. New hard to find interior visor clip in black.
New OEM genuine Nissan 2 piece steering column shaft collar. This part installs behind the steering wheel on the steering shaft. Will fit Datsun 240Z, 260Z, and 280Z, 1970-78.
New OEM Genuine Nissan rubber inner shift boot. This rubber shift boot will fit 1972-78 Datsun 240Z, 260Z, and 280Z. This inner shift boot fits on the metal floor tunnel which...
New OEM Genuine Nissan shift boot clip. This shifter boot clip will fit Datsun 240Z, 260Z and 280Z, 1970-78. Six clips were used from the factory.
New OEM Genuine Nissan pedal pad for clutch or brake pedal. This pedal cover will fit Datsun 240Z, 260Z, 280Z, 280ZX, and 300ZX, 1970-89 and 510 68-73.
New OEM Genuine Nissan hood release cable. This hood release will fit Datsun 240Z, 260Z, and 280Z, 1970 to 1978. This cable includes the firewall rubber grommet.