Genuine Nissan replacement pivot ball for the Nissan 90-96 300ZX, 2003 Nissan 350Z.
These bolts are used to mount the clutch pressure plate to the flywheel. 9 are required for the entire pressure plate. Product # 30223-JA00AReplaces # 30223-07S00
These are the replacement clutch pressure plate washers. 9 are required for the entire pressure plate.
These bushings are located at end of crank shaft where the Transmission input shaft slides into. They will wear out over time, would be good to replace them every 120K. Product...
SHIM-BEARING T=0.1 is Lookup Code 32218M in the diagram.
SHIM-BEARING T=0.5 is Lookup Code 32218M in the diagram.
SHIM-BEARING T=0.6 is Lookup Code 32218M in the diagram.
Genuine Nissan clip. Nissan OEM Clutch Pedal Stop Clip - Nissan 240SX, 300ZX, 350Z, 370Z
Genuine Nissan replacement steering rack cap for the 300ZX.
The original pilot bushing is just a metal sleeve that the transmission input shaft slides into. These sleeves usually get worn out, and leave shavings inside the bell housing....
WASHER-ADJUST is Lookup Code 38453Y in the diagram.
As the years and miles pass on, the wheels bearings start to wear out and make noises. If they are not replaced in time, they can seize and cause further damage. Sold as 1 Bearing.
As the years and miles pass on, the wheels bearings start to wear out and make noises. If they are not replaced in time, they can seize and cause further damage. Sold as 1 Bearing