Datsun 240Z, 260Z and 280Z transmission, axle and driveshaft parts. We carry OEM genuine Nissan, aftermarket and performance parts for the Z car driveline. Custom driveshafts in steel and aluminum can be made to fit your original driveline or custom engine swap. Our billet axles are a no compromise solution if you are racing your Z car and making a lot of power! Our OEM genuine Nissan parts that are still available will have "OEM" in the title. We also carry a large selction of used parts which are not all on the website, so please contact us for unusual parts that are not listed.
New rear differential front pinion seal. This seal will fit Datsun cars with R180 and R160 rear differential. The R180 was the standard rearend on most all 240Z, 260Z, and 280Z,...
New clutch release (throwout) bearing for 1970-83 Datsun 240Z, 260Z, 280Z, and 280ZX.
Datsun 240Z transmission mount. New transmission mount for Datsun 240Z 1970-73. Will fit automatic transmission.
One new axle joint boot kit for 1970-83 Datsun 240Z/260Z/280Z/280ZX. Includes high quality rubber boot, clamps, & grease. This is a universal type boot which may require...
New speedometer cable for Datsun 240Z, 260Z and 280Z, 1970-1978. Replaces the stock speedo cable. If your spedometer is not working or is jumping around this cable might be the...
New reverse light switch for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-1983. This switch mounts on the side of the manual (4 & 5 speed) transmission. If you have a...
New rear output shaft oil seal for 4 and 5-Speed manual transmissions as well as automatic. This seal fits Datsun 240Z, 260Z, 280Z, 280ZX and 300ZX. Years 1970-89, including...
New automatic transmission rear seal repair sleeve for 1970-78 Datsun 240Z, 260Z and 280Z. If your auto trans continues to leak at the output shaft even after a new seal, you...
New clutch pilot bushing for Datsun 240Z, 260Z, 280Z and 280ZX, 1970-83. This bushing goes in the end of the crankshaft and the transmission input shaft goes into it.
New clutch pilot bushing removal tool for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. This tool requires a grease gun to attach to it for hydraulic pressure to force the bushing...
New front spindle nut, retainer ring, washer & cotter pin for Datsun 240Z, 260Z, 280Z, 280ZX 1970-83. This front wheel bearing hardware kit is a nice collection of parts to...
This bearing will fit 1970-78 Datsun 240Z, 260Z and 280Z. The rear axle has two bearings, the inner and outer. This outer bearing is the one closest to the wheel. The axle...
One new rear wheel bearing inner seal for Datsun 240Z, 260Z and 280Z, 1970-78. This axle seal will fit on the right or left side. This seal is located on the outer stubaxle...
One new front inner (engine side) wheel bearing with race. This wheel ebaring will fit Datsun 240Z, 260Z and 280Z, 1970-78. Will fit on right or left side. Order 2 for both sides.
New front wheel bearing seal for 1970-83 Datsun 240Z, 260Z, 280Z and 280ZX. This bearing seal will fit right and left sides. If you are replacing or greasing the front wheel...
Inner rear stub axle wheel bearing. This bearing will fit 1970-78 Datsun 240Z, 260Z and 280Z. The rear axle has two bearings, the inner and outer. The inner bearing is the one...
New set of ARP flywheel bolts for 1970-78 Datsun 240Z, 260Z, 280Z, 280ZX and 510. Includes 6-bolts with lube and install instructions. ARP makes the highest quality fasteners on...
New stock replacement clutch kit for Datsun 280Z and 280ZX 1975-1983 (not turbo or 2+2). This clutch kit is for 2-seater, non-turbo cars. Includes: Pressure plate, disc, t/o...
New clutch hose for 1970-83 Datsun 240Z, 260Z, 280Z, 280ZX and 510. This is the hose that goes from the clutch slave cylinder to the frame of the car. Stock replacement part....
datsun 280Z clutch master cylinder. New clutch master cylinder for 1975-1978 Datsun 280Z. The clutch master cylinder is a common component to fail on the Datsun Z cars. If you...
Datsun 240Z clutch master cylinder. New clutch master cylinder for Datsun 240Z & 260Z 1970-1974. If you lose your clutch pedal feel than it is either the clutch master...
One new driveshaft U-Joint for Datsun 240Z, 260Z and 280Z 1970-77. This U-joint will fit the front or rear of the driveshaft (propeller shaft). If your car has a clunking...
One New axle (1/2 shaft) U-Joint for 1970-83 Datsun 240Z, 260Z, 280Z, 280ZX and 510. On the Datsun there is a U-joint on each end of the rear axles so a total of 4 U-joints....
Datsun 240Z, 260Z & 280Z lightweight flywheel. New Competition Clutch brand lightweight steel flywheel for Datsun 240Z, 260Z, 280Z, 280ZX 1970-1983. Clutch flywheel has a...
New Prothane black polyurethane bushings for 1970-78 Datsun 240Z, 260Z and 280Z, mustache bar. These bushings are for the rear differential mount (mustache) bar to the chassis.
New Clutch kit for Datsun 240Z and 260Z 1970 to 11/ 1974. Includes: Disc, pressure plate, t/o bearing, pilot bushing and alignment tool. OE spec,
Set of four stock lug nuts for steel wheels or any wheel with a conical seat. These nuts will fit 1970-83 Datsun Z240Z, 260Z, 280Z, 280ZX and 510. Thread size M12 X 1.25 for all...
Set of four chrome lug nuts for mag wheels. These lug nuts will fit 1970-83 Datsun 240Z, 260Z, 280Z 280ZX and 510.
Set of 16 chrome lug nuts with washers for mag wheels. These wheel nuts will fit 1970-83 Datsun 240Z, 260Z, 280Z, 280ZX, 510 & Roadster. These nuts have a reach of 5/8"...
New front input shaft oil seal for 4 and 5-Speed manual transmission. Fits 1970-1989 Datsun 240Z 260Z 280Z 280ZX 300ZX and Datsun 510.
New transmission mount for Datsun 240Z, 260Z, 280Z and 280ZX, 1972-1983. Will fit 1970-83 manual transmission and 74-83 automatic.
New rear differential cover gasket for R180 rear differential. The R180 rearend was found in most of the 1970-78 Datsun 240Z, Datsun 260Z and Datsun 280Z's 1970-78. Over the...
New R200 rear differential cover gasket. Fits Datsun 240Z, 260Z, 280Z and 280ZX with R200 rearend.
New stock replacement flywheel for Datsun 280Z and 280ZX 1975-1983, 2+2 only or Turbo. The 2+2 clutch cover is slightly larger so it has a different bolt pattern.
New automatic transmission filter & gasket for Datsun 240Z 260Z 280Z 280ZX including Turbo, 1970-83. With 14- bolt pan.
New pair of wheel spacers that are 1/4 inch (6mm) thick aluminum. These will fit all of the Datsun 4-lug cars including 240Z, 260Z, 280Z, 280ZX and 510.
New auto trans modulator (governer) valve. This valve should fit all Datsun 240Z 260Z 280Z 1970-78. This valve has thread diameter of 18mm if you want to check yours to make...
Datsun 240Z, 260Z, 280Z, 280ZX clutch tool. New clutch alignment tool for 1970-83 Datsun 240Z, 260Z, 280Z, 280ZX & 510. Required when installing a new clutch. Aligns the...
One new OEM genuine Nissan clutch and brake pedal clevis pin. This will fit 1973-78 Datsun 240Z, 260Z, and 280Z. This pin goes on the top of the brake and clutch pedals where...
New Genuine Nissan OEM wood shift knob. This wood knob will fit Datsun 240Z, 260Z, and 280Z, 1970-78. This shift knob we still get from Nissan. High quality as would be expected...
New OEM Genuine Nissan rear differential mount. This rear diff mount will fit Datsun 240Z, Datsun 260Z, and Datsun 280Z, 7/1971-78. The rear differential insulator is what holds...
New OEM genuine Nissan shifter bushing for Sept 1971 - 1981 Datsun 240Z, 260Z, 280Z and 280ZX (non turbo). This is a plastic bushing that goes at the base of the shifter. Stock...
New OEM genuine Nissan driveshaft bolt for 1970-78 Datsun 240Z, 260Z and 280Z. These bolts connect the driveshaft (propeller shaft) from the transmission to the rear diff. These...
New OEM genuine Nissan auto trans brake pedal pad. This rubber pedal pad will fit 1970-83 Datsun 240Z, 260Z, 280Z and 280ZX.
New OEM Nissan manual transmission mount. Will fit Datsun 240Z, 260Z and 280Z, 1970-78. This is a genuine Nissan part.
New OEM genuine Nissan clutch fork ball for 1972-83 Datsun 240Z/260Z/280Z/280zx. This part threads into the manual transmission bellhousing and the clutch fork pivots on it.
Datsun 240Z, 260Z, 280Z & 280ZX clutch fork. New OEM Genuine Nissan clutch fork with spring. Will fit1973-83 Datsun 240Z,260Z, 280Z, 280ZX. Will fit 4 & 5 speed trans....
New OEM genuine Nissan reverse light switch for 1970-83 Datsun 240Z, 260Z, 280Z and 280ZX. This switch mounts on the side of the manual (4 & 5 speed) transmission. This...