TORQEN Forged AL7075-T6 Active Cooling 5×114.3 Hubcentric Wheel Spacers v3 - 20mm Pair

• CNC Machined - 0.02mm tolerance precision - perfect mounting
• Active cooling technique - symmetrical petal shape grooves for effective heat dissipation and water / debris protection
• Knurling design - reduce internal stress and enhanced heat dissipation
• Full-cone seat - greater force area and safer design
• Hub centric - eliminates the vibration and transfers bolt load
• Removal grooves - makes it a lot easier to remove the spacers, but also improves air cooling
• Forged AL7075-T6 with Tensile Strength ≥ 572 Mpa
• ISO Grade 10 Nuts with BONOSS Engraved, Strength ≥ 1110 Mpa
• ISO Grade 12.9 Studs, Strength ≥ 1220 Mpa - higher grade than the OEM studs at 10.9
• Over 66 SGS TÜV Test Reports Certificated
• 10 Years Warranty

If the thickness of the wheel spacer is smaller than the length of the original OEM studs, the wheels must have for small pockets in the mounting surface. If using wheels without pockets, the stock studs should be shortened so that they do not extend beyond the thickness of the spacer.