Nismo LMGT4 Omori Factory Spec Wheel 18 x 10.5J +15 / 5H (Tuner size) ANODISED BRONZE

Made by RAYS Engineering, the forged lightweight LMGT4 wheel design is a true classic NISMO Motorsports Enthusiasts. The new NISMO Omori Spec LMGT4 is the very same wheel adopted for use in the current Nissan GT-R NISMO GT3 race car that is activley competing in the Super GT GT300 class, as well as Nurburgring 24h races.

18 x 10.5J +15 (660132074S1) is an aggressive tuner size and is not specific.

This forged monoblock wheel from Rays Engineering was originally designed for fitment on BNR32, BCNR33, and BNR34 GTR but is available in offsets with perfect fitment on nearly any modern and past Nissan / Infiniti! The forged barrel is knurled for improved tire grip and has been redesigned using Rays current forging process to be stronger than the original LMGT4. Concave faces are standard for all three wheel size specifications.

For Skyline GT-R (BNR34):
18×10.5J Inset 15: Reference tire size 275/35R18 (same size for front and rear)

Note: Tuner sizes will cause the wheels to protrude and do not comply with safety standards, therefore they cannot be used on public roads. If using on public roads, lower the vehicle height, add camber, and install fender covers to prevent protrusion. (Please ensure a minimum ground clearance of 90mm.)

-Installation Example- *Measurements are our company's actual measurements.

* Vehicle: BNR34 Z-tune
* Installed parts: Height-adjustable suspension, NISMO circuit link (discontinued), Z-tune front fenders, NISMO fender cover set (63000-RNR45 *Rr only)
* Ride height: 40mm lower
* Camber: Front 2 degrees 40 minutes, Rear 2 degrees 30 minutes
* Wheel and tire clearance in fender: Front 10mm, Rear 5mm

Skyline GT-R (BNR32)
18×9.0J Inset 22: Reference tire size 245/40R18 (same size for front and rear)
Note: Cannot be installed simultaneously with NISMO Circuit Link.

Skyline GT-R (BCNR33, BNR34)
18×9.5J Inset 12: Reference tire size 265/35R18 (same size for front and rear)