This adapter is used to convert the hose-barbed outlet of the Walbro/TI Automotive F90000267 and F90000274 fuel pumps to -6AN male. The two billet aluminum adapter halves are...
Radium Engineering Silicone Reducing Coupler 2.25-2.5IN ID Offset
Product DetailsThe fuel surge tank can be mounted near the main fuel tank or in the engine bay. Mounting locations near heat sources or moving parts such as suspension...
Radium Engineering 10AN Coupler Female to Female
This is a diaphragm service replacement for the following products: RADIUM FPD-R (fuel pulse damper, range) RADIUM FPD-XR (fuel pulse damper, extra range)
This is a diaphragm service replacement for the following products: RADIUM MPR (multi-pump regulator) RADIUM FST-R (fuel surge tank regulator) RADIUM DMR (direct mount regulator)
The Radium Engineering fuel cell fill kits can be used on any cell that uses a 6-bolt 2.18" (55mm) bolt circle mounting flange. The 20-0147 Fuel Cell Remote Mount Fill Neck is...
The OEM VQ35HR and VQ37VHR fuel pulse dampers can be reused with these adapters. One is required for each fuel pulse damper.
Fuel cell 6x10 inch, 24-bolt viton flange gasket.
This kit can be used for all fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. and is included in the Radium FCST. Depending...
In some cases, mounting a fuel pressure gauge or pressure transducer directly to the fuel rail is not possible due to confined space around the fuel rail, or the fuel gauge...
Anodized black billet aluminum clamp used for securing -6AN hoses, wire harnesses, etc. Includes all stainless steel hardware (4 bolts and 2 sheet metal screws). Each of the 5...