BACKGROUNDSince 2010, external Radium Engineering fuel surge tanks have been an excellent way to eliminate fuel starvation that occurs in racing.
Float-style fuel level sending units with standard SAE 5-bolt mounting pattern. Easy to install using the supplied hardware and Deutsch connectors (gauge not included). Fits...
This complete refueling kit is designed specifically for the Radium Engineering FCST. The FCST does not come standard with any of the parts in this kit. As described below, the...
RA-Series Universal 6 Gallon Fuel Cell by RadiumThe basic construction of each RA-series fuel cell uses a powder-coated lightweight aluminum container and molded polymer bladder.
Radium Engineering 18-0061 RADIUM ENGINEERING GASKET, TGV TO HEAD, SUBARU EJ ENGINES Multi-layer graphite gasket for TGV to head interface on Subaru EJ engines. Quantity two...
These 35 micron inlet filter baskets are compatible with many fuel injectors. They are NOT directly compatible with the popular Bosch EV14 injector. However, they are compatible...
This 65 Micron pre-filter sock easily installs and has been confirmed to work on the following popular in-tank fuel pumps: -Walbro 255 GSS341-Walbro 255 GSS342-Walbro...
These are the same machined aluminum injector seats used in Radium fuel rails for Mazda/Eunos Cosmo and RX-7 rotary engines. They are required when converting the OEM 16mm...
Floor and Wall Mount - This bracket is laser cut from aluminum and powder coated black and can be mounted on the side or bottom of the surge tank.
This Radium bulkhead plate kit is great when multiple -6AN bulkhead fittings need to pass through a wall, floor, etc. The plate gives a finished look and is necessary when...
Radium Engineering Universal Coolant Tank Mounting Bracket
This M14x1.5 Inverted flare to 6AN male adapter fitting is slightly shorter than 14-0118. The 14-0121 adapter is compatible with many Toyota, Mitsubishi, Eagle, Plymouth, etc....
This adapter is used to convert the hose-barbed outlet of the Walbro/TI Automotive F90000267 and F90000274 fuel pumps to -6AN male. The two billet aluminum adapter halves are...
Radium Engineering Silicone Reducing Coupler 2.25-2.5IN ID Offset
Product DetailsThe fuel surge tank can be mounted near the main fuel tank or in the engine bay. Mounting locations near heat sources or moving parts such as suspension...
Radium Engineering 10AN Coupler Female to Female
This is a diaphragm service replacement for the following products: RADIUM FPD-R (fuel pulse damper, range) RADIUM FPD-XR (fuel pulse damper, extra range)
This is a diaphragm service replacement for the following products: RADIUM MPR (multi-pump regulator) RADIUM FST-R (fuel surge tank regulator) RADIUM DMR (direct mount regulator)
The Radium Engineering fuel cell fill kits can be used on any cell that uses a 6-bolt 2.18" (55mm) bolt circle mounting flange. The 20-0147 Fuel Cell Remote Mount Fill Neck is...
The OEM VQ35HR and VQ37VHR fuel pulse dampers can be reused with these adapters. One is required for each fuel pulse damper.
Fuel cell 6x10 inch, 24-bolt viton flange gasket.
This kit can be used for all fuel cells that use a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. and is included in the Radium FCST. Depending...
In some cases, mounting a fuel pressure gauge or pressure transducer directly to the fuel rail is not possible due to confined space around the fuel rail, or the fuel gauge...
Anodized black billet aluminum clamp used for securing -6AN hoses, wire harnesses, etc. Includes all stainless steel hardware (4 bolts and 2 sheet metal screws). Each of the 5...
This kit can be used to remotely drain any of the Radium Engineering catch cans without the need to unscrew the canister body. -Anodized 4AN ORB Barbed Adapter Fitting, Black...
All replacement elements for the Radium fuel filter use anodized aluminum end caps that are laser engraved for easy identification and use an internal Viton O-ring for...
Radium Engineering Silicone Hose Kit 2.25in to 1.5in 45Deg Elbow
The Radium Engineering fuel cell fill kits can be used on any cell that uses a 6-bolt 2.18" (55mm) bolt circle mounting flange. The 20-0147 Fuel Cell Remote Mount Fill Neck is...
These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator to be reused in an application other than the OEM fuel rail. All fittings permit the...
These adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, they can be used in any...
These adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, they can be used in any...
These adapter fittings are designed to be used in many Radium products including fuel rails, surge tanks, fuel pressure regulators, etc. However, they can be used in any...
The OEM VQ35DE fuel pulse damper can be reused with this adapter. One is required.
Radium Engineering Fuel Cell Fill Cap Vented
his block-off plate kit is used when the 5-bolt SAE flanged fuel level sensor is not used. This is extensively used for customers with the Radium Fuel Cell Surge Tank but could...
Radium Engineering Universal Competition Catch Can Mtg Bracket
These bright dipped anodized billet 6061 aluminum clamp-style mounting brackets were designed for components such as fuel filters, oil catch cans, external fuel pumps, etc. The...
This high-accuracy fuel pressure gauge is suitable for all fueling applications. It features an acrylic lens with a silicone filled dial that reads from 0 to 100psi (0 to 6.9...
The Radium Engineering anodized billet aluminum adapter allows -6AN hose and fittings to be used with the OEM Toyota/Lotus fuel pump housing outlet. The adapter features an...
Radium Engineering Fuel Cap Remote Mount Vented
NOTE: CERTAIN FUEL RAILS USED WITH THESE ADAPTERS MAY NOT BE COMPATIBLE WITH AVCS SOLENOIDS. The Subaru Impreza 2.5i and JDM Version 8/9 intake manifolds are great solutions for...
These billet aluminum adapters are designed to provide an easy way to tap into a 1-1/4" or 1-3/4" I.D. hose. They features a 1/4 NPT threaded hole that can accept a variety of...
Radium Engineering valve for PCV (positive crankcase ventilation) systems. Do not mistake this for a simply one-way check valve. The PCV valve's internal plunger dynamically...
Radium 6 Micron Microglass Replacement Fuel Filter Element
This mounting bracket is used for vehicles that may have a limited mounting height. It can be mounted on a floor and against a wall. This bracket is made from laser cut aluminum...
Radium Engineering Adapter Fitting 5/16 SAE Female to 3/8 Inch Hose Barb
These connectors are used in various Radium products such as surge tanks. These kits can be used for rebuilding a damaged connector or for installers that want to pin-out their...
These connectors are used in various Radium products such as surge tanks. These kits can be used for rebuilding a damaged connector or for installers that want to pin-out their...