350z DE Z33 Cometic MLS Metal Head Gaskets Infiniti G35 - Bore 96mm x .91mmView larger

350z DE Z33 Cometic MLS Metal Head Gaskets Infiniti G35 - Bore 96mm x .91mm

The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless Steel for increased strength, it's ability to rebound and corrosion resistance. 

More details

£226.80

Part # C4361-C4345

Add to wishlist

The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based materioal (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton Coating is heat resistant to 250 degrees Celcius or 482 degrees farenheit.

The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.

The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

2 Gaskets are included, 0.030"(.76mm) is Standard, larger sizes are only required if heads or block have been milled beyond required specs.


Add Your Review
close
Rating:
Name:
Text:
  Add review