Aluminum fitting for adapting 10AN ORB male thread to 6AN, 8AN or 10AN male flare fitting.
Aluminum fitting for adapting 10AN ORB male thread to 6AN, 8AN or 10AN male flare fitting.
1/2" npt to 3/8" NPT adaptor. The 1/2" size will fit our billet fuel rail inlet and outlets.
New Bosch oxygen sensor for use with our FAST EFI kit on Datsun 280Z and 280ZX. The FAST kit comes with a new sensor but if you need an extra this is the one that works. Six...
Black aluminum 8 AN ORB (O-ring) male fitting adaptor to 1/8 NPT female.
New custom fabricated aluminum intake manifold with throttle body and fuel rail for Datsun L series 6-cylinder engines. Intakes will come with a fuel rail that accepts modern...
New pair of Borla 40mm throttle bodies for SU replacement. Left and right side. These throttle bodies use a 14mm O-ring style injector and will require a custom linkage and...
Clutch slave cylinder for Datsun 280ZX (non turbo), 1979-83. Includes rod and boot. * See our adjustable rod if you are needing more rod length to take up some slack in the system.
New air intake boot for 1979-83 280Z (non turbo). This boot fits between the air cleaner and the Air Flow Meter (AFM). Approx 8" long. Each end has an opening of about 72mm.
New air intake boot for 1979-83 280ZX (non turbo). This boot fits between the throttle body and the Air Flow Meter (AFM). Choose from different styles for different years....
New air intake boot for 1979-83 280ZX (non turbo). This boot fits between the throttle body and the Air Flow Meter (AFM). Choose from different styles for different years....
New air intake boot for 1979-83 280ZX (non turbo). This boot fits between the throttle body and the Air Flow Meter (AFM). Choose from different styles for different years....
New Protunerz fuel rail for Datsun L6 EFI engines. Available for use with stock injectors, 11mm or 14mm injectors. Several colors available as well. 6AN fittings on the inlet...
New air intake hose for Datsun 280Z 1975-78. Two different styles for these years so select which one you need. The 1975-77 does not have a top aux port, the 77-78 model does...
New Protunerz fuel rail for Datsun L6 EFI engines. Available for use with stock injectors, 11mm or 14mm injectors. Several colors available as well. 6AN fittings on the inlet...
New air intake hose for Datsun 280Z 1975-78. Two different styles for these years so select which one you need. The 1975-77 does not have a top aux port, the 77-78 model does...
New Protunerz fuel rail for Datsun L6 EFI engines. Available for use with stock injectors, 11mm or 14mm injectors. Several colors available as well. 6AN fittings on the inlet...
New Bosch fuel pressure damper for Datsun 280Z and ZX 1975-83. This is a Bosch replacement for the original damper that is no longer available. Damper is typically located...
New Genuine Nissan BPT (Back Pressure Transducer) valve. This part mounts on top of the intake near the EGR valve and works with the EGR valve. The BPT valve appears to have...
New aftermarket inline fuel pressure damper for 280Z and 280ZX EFI fuel injection systems. The original damper is located at the rear of the car next to the fuel pump. The...
New air flow meter/throttle body hose clamps for 1975-83 280Z and 280ZX. Wire style clamps like originals. Two different sizes of clamps. Choose from 70mm (2.75") or 78mm...
Rubber plug/cap kit includes 8 plugs. Used for plugging heater hoses and vacuum lines. (2) 3/4" I.D. Thick rubber (2) 5/8" I.D. Thick rubber (2) 1/2" I.D. Thin rubber (2)...
New air cleaner rubber seal for 1975-78 280Z. Seals the air filter housing lid.
Bracket for holding the tube when converting to a cold air intake filter kit on Datsun 280Z and 280ZX. Stainless steel bracket that mounts to the firewall and supports the...