No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Fuel Injection
£33.95 800-035_36413New engine water temperature sensor switch for Datsun 280Z 1975 to 1978. This temperature sensor with the two pin square connector is for fuel injection controls on 280Z and...
£142.42 800-158Datsun 280Z K&N air filter. New K&N performance air filter for 1975-78 Datsun 280Z and 1984-87 300ZX. (Not 280ZX). This K&N filter is a stock replacement, no mods...
£163.94 800-205New electric fuel pump for Datsun 280Z and 280ZX cars with fuel injection 1975-1983. This is a high pressure fuel injection pump and not for carburetors. Simple 12V 2-wire...
£21.53 800-206_77022WSNew fuel filter for 1975-83 Datsun 280Z and 280ZX. High quality aftermarket filter that installs in stock location. This is a high pressure filter for fuel injection cars 1975-83.
£8.26 800-208New throttle body gasket for 1975-83 Datsun 280Z and 280ZX. This gasket fits in between the throttle body & the intake plenum.
£14.89 800-265Datsun 280Z fuel injector connector. One New fuel injector and cold start valve connector with 9" of wire. Works on cold start valve, fuel injectors & thermo switch. Will...
£149.04 800-296New OE fit injector with seals and clamp for Datsun 280Z and 280ZX, 1975-1983. Leaky or faulty fuel injectors can cause low power and poor fuel economy. Dont forget to replace...
£165.58 800-297Datsun 280Z cold start valve. New Cold start valve for Datsun 280Z & 280ZX including turbo 1975-83. This fuel injector mounts in the intake & adds additional fuel when...
£11.58 800-298Datsun 280Z fuel injector holder. One new fuel injection base with metal keeper for Datsun 280Z & 280ZX (turbo included) 1975-83. This is the base that holds the injector to...
£19.86 800-361Datsun 280Z fuel injection seals. New complete injector seal kit for Datsun 280Z, 280ZX & 300ZX 1975-89. These replace all of the upper & lower injector seals. These...
£10.76 650-249New stainless steel injector retainer plate for Datsun 280Z and 280ZX, 1975-83. Exact copy of the originals but made out of stainless steel so no rusting or corrosion.
£48.85 200-516Datsun 280Z fuel filter. New OEM Genuine Nissan fuel filter for cars with fuel injection. Will fit Datsun 1975-83 280Z & 280ZX stock location filter. If your Datsun 280Z has...
£918.00 200-696New OEM Genuine Nissan electric fuel pump for fuel injection. Datsun 280Z and 280ZX, 1975-83 (non turbo). This is a factory Nissan pump direct replacement for Datsun Z cars with...
£230.18 200-773Datsun 280Z and 280ZX cold start fuel injector. New OEM Genuine Nissan cold start valve for 1975-83 Datsun 280Z and 280ZX.
£110.12 800-435New K&N perforamnce stock replacement air filter for Datsun 280ZX 1981-83 including turbo. Cleanable reusable high flow air filter element. K&N air filters claim to flow...
£64.57 200-435New OEM Genuine Nissan engine water temperature sensor switch for Datsun 280Z and 280ZX, 1975-83. This temperature sensor is for the fuel injection controls. Includes sealing...
£190.44 200-434Datsun 280Z fuel injection sensor. New genuine Nissan OEM engine fuel injection thermo time/Air temp switch for Datsun 280Z and 280ZX 1975-83. Includes washer. Fuel injection...
£404.06 800-498New stainless steel main fuel line for 1977-78 Datsun 280Z. This is the line that runs from the pump to the fuel rail. The line is bent to factory specs. Made in USA. *Item...
£428.90 800-500New stainless steel fuel return line for 1977-78 Datsun 280Z. Pre bent to factory specs. Made in USA. Stainless steel lines replace factory lines with no modifications. * Item...
£27.32 800-5966AN 90 degree swivel fitting.
£18.22 200-810New OEM Genuine Nissan MAF hose clamp. This clamp will fit Datsun 280Z and 280ZX, 1975-83, including Turbo. Three of these clamps are used on the engine. See diagram for part...
£49.66 800-621High quality Denso single wire oxygen sensor for your 1979-83 Datsun 280ZX. The oxygen sensor feeds info to the engine computer about the air/fuel ratio in the exhaust.
£129.17 200-818OEM genuine Nissan rubber air flow meter hose. This air intake boot will fit Datsun 280Z and 280ZX, 1975-83 (non turbo). This boot has a single auxiliary hole . The two hole...
£10.91 800-648Black anodized fuel pump fitting with 6AN ORB to 6AN or 8AN male.This fitting will work with our Deatsch Werks high performance electric fuel pump PT# 800-649
£11.58 800-493Black anodized fuel pump fitting with 6AN ORB to 6AN or 8AN male.This fitting will work with our Deatsch Werks high performance electric fuel pump PT# 800-649
£2.48 800-658High pressure fuel injection hose clamp. Choose from 3 sizes: 658= fits 1/4" I.D. hose 646= fits 5/16" I.D. hose 1336= fits 3/8" I.D. hose
£3.31 800-646High pressure fuel injection hose clamp. Choose from 3 sizes: 658= fits 1/4" I.D. hose 646= fits 5/16" I.D. hose 1336= fits 3/8" I.D. hose
£3.31 800-1336High pressure fuel injection hose clamp. Choose from 3 sizes: 658= fits 1/4" I.D. hose 646= fits 5/16" I.D. hose 1336= fits 3/8" I.D. hose
£82.78 800-801_RU-4960New K&N air filter which will fit on 2.75" tubing. Will fit Datsun 280Z and 280ZX with aftermarket cold air intake kits. This filter is the correct size for fuel injection...
£12.42 800-863New 18mm oxygen sensor plug with seal.
£13.23 800-2031Metric 22mm plug for the EGR pipe to the exhaust manifold or header on Datsun 280Z and 280ZX. Choose from allen head short thread taper or hex head standard longer threads.
£13.23 800-864Metric 22mm plug for the EGR pipe to the exhaust manifold or header on Datsun 280Z and 280ZX. Choose from allen head short thread taper or hex head standard longer threads.
£3.13 800-884New rubber fuel hose for carbureted and fuel injection engines. Quality made in the USA fuel hose. Available in 1/4", 5/16", 3/8" and 7/16" for lower pressure carbureted...
£3.13 800-885New rubber fuel hose for carbureted and fuel injection engines. Quality made in the USA fuel hose. Available in 1/4", 5/16", 3/8" and 7/16" for lower pressure carbureted...
£6.61 800-883New rubber fuel hose for carbureted and fuel injection engines. Quality made in the USA fuel hose. Available in 1/4", 5/16", 3/8" and 7/16" for lower pressure carbureted...
£3.30 800-900New rubber fuel hose for carbureted and fuel injection engines. Quality made in the USA fuel hose. Available in 1/4", 5/16", 3/8" and 7/16" for lower pressure carbureted...
£3.63 800-789New rubber fuel hose for carbureted and fuel injection engines. Quality made in the USA fuel hose. Available in 1/4", 5/16", 3/8" and 7/16" for lower pressure carbureted...
£7.45 800-623Assortment of engine vacuum rubber plugs. These are great to have around for your Datsun 240Z, Dtasun 260Z, Datsun 280Z, & 280ZX, 1970-83. These rubber caps will plug unused...
£31.45 800-931New black silicone hose for replacement of the original air intake hose. This hose will fit in between the air flow meter and the air filter housing on Datsun 280Z 1975-78. The...
£81.14 800-925New PCV hose. This hose will fit Datsun 280Z and 280ZX, 1975-1983. The hose connects from the engine block vent under the intake manifold to the PCV valve. Two different sizes...
£87.77 800-920New/Remanufactured fuel injector for Datsun 280Z and 280ZX. Includes hose clamp and seals.
£163.94 800-911Fuel pressure regulator for Datsun 280Z, 1975-77. A faulty fuel regulator can cause incorrect fuel pressure which will affect all RPM of the engines performance. This regulator...
£66.24 800-933New ported vacuum switch for Datsun 280ZX, 1979-83.
£66.24 800-933New ported vacuum switch for Datsun 280ZX, 1979-83.
£31.45 800-942Fuel pressure gauge for 0-100 PSI of pressure. This guage works great for fuel injection engines which operate in the 40-60 psi range. Uses 1/8" pipe threads, gauge face is 1...
£5.80 800-943Stainless steel lined hose clamp for the air intake to the air flow meter on Datsun 280Z and 280ZX, 1975-83. This clamp will work with the original and aftermarket hoses that...
£4.79 800-943Hose clamp specially designed for silicone hose so that it will not tear the hose. 5/8" to 4" sizes available. Sizes represent the O.D. of the hose.
£29.79 800-1232New replacement silicone air intake hose. This hose fits in between the throttle body and the air flow meter on Datsun 280Z and 280ZX, 1975-1983. This hose is different from the...
£29.79 800-956 blkNew replacement silicone air intake hose. This hose fits in between the throttle body and the air flow meter on Datsun 280Z and 280ZX, 1975-1983. This hose is different from the...
£31.45 800-931New replacement silicone air intake hose. This hose fits in between the throttle body and the air flow meter on Datsun 280Z and 280ZX, 1975-1983. This hose is different from the...
£31.45 800-931New black silicone hose for replacement of the original air intake hose. This hose will fit in between the air flow meter and the air filter housing on Datsun 280Z 1975-78. The...
£38.92 800-561New replacement silicone air intake hose. This hose fits in between the throttle body and the air flow meter on Datsun 280Z and 280ZX, 1975-1983. This hose is different from the...
£6.62 800-958Variable resistor for altering the fueling on Datsun 280Z and 280ZX fuel injection cars. This variable resistor can be wired in between the coolant sensor and the computer add...
£48.85 800-978Reproduction silicone T hose for the intake vacuum lines and Datsun 280ZX, 1980-1983 (non turbo). This hose mounts on the side of the intake manifold and is no longer available...
£48.85 800-978Reproduction silicone T hose for the intake vacuum lines and Datsun 280ZX, 1980-1983 (non turbo). This hose mounts on the side of the intake manifold and is no longer available...
£59.60 800-979Aluminum 2.75" O.D. 90 degree bend tubing with 5" legs. This is the correct size tubing to match the air flow meter on Datsun 280Z and 280ZX fuel injection..
£6.61 800-1034New wing nut for the air cleaner housing lid on Datsun 280ZX 1979-83. Some housings used two and some had three. This is a new aftermarket part that is very similar to the...
£6.61 800-1034New wing nut for the air cleaner housing lid on Datsun 280ZX 1979-83. Some housings used two and some had three. This is a new aftermarket part that is very similar to the...
£6.61 800-1034New wing nut for the air cleaner housing lid on Datsun 280ZX 1979-83. Some housings used two and some had three. This is a new aftermarket part that is very similar to the...
£101.02 800-1038New fuel injector for Datsun 280ZX turbo, 1981-1983. Stock replacement injector, Standard motor products.
£97.70 650-207Remote idle air control valve fitting for use with EFI. With this setup you can attach a 3/8" barb and run it to your intake for idle control with aftermarket EFI computers....
£19.86 200-690OEM Nissan fuel pump filter for Datsun 240Z and 260Z with factory electric fuel pump. This is the filter that is located in the pump at the rear of the car. Also fits Datsun...
£19.86 200-690Remote idle air control valve fitting for use with EFI. With this setup you can attach a 3/8" barb and run it to your intake for idle control with aftermarket EFI computers....
£19.86 200-690OEM Nissan fuel pump filter for Datsun 240Z and 260Z with factory electric fuel pump. This is the filter that is located in the pump at the rear of the car. Also fits Datsun...
£48.85 800-1047New idle air control valve for aftermarket EFI systems. GM style valve, 1990's.
£180.50 650-208Remote idle air control valve for use with EFI. New billet aluminum body with air filter and Delphi IAC valve. Delphi is OEM quality replacement. With this valve you can attach...
£3.63 800-1070Heatshield sleeve for fuel lines, coolant lines, brake lines, wires, anything that needs protected from heat. This sleeve is a plyable (not woven) material that can make bends...
£5.78 800-1067Heatshield sleeve for fuel lines, coolant lines, brake lines, wires, anything that needs protected from heat. This sleeve is a plyable (not woven) material that can make bends...
£3.96 800-1322Heatshield sleeve for fuel lines, coolant lines, brake lines, wires, anything that needs protected from heat. This sleeve is a plyable (not woven) material that can make bends...
£16.56 800-1322New reproduction rocker panel hole plug. These plugs function great for plugging the holes and keeping moisture and debris out. The 240Z had two plugs in each rocker (4 total)...
£2.48 800-1089Rubber hose for coolant or air flow. 5/8" (16mm) I.D. Handle up to 60 PSI. Sold by the foot (12") lengths. If you order more than one foot it will be in a continuous length....
£2.48 800-1089Rubber hose for coolant or air flow. 5/8" (16mm) I.D. Handle up to 60 PSI. Sold by the foot (12") lengths. If you order more than one foot it will be in a continuous length....
£7.79 800-1089XNew air flow meter/throttle body hose clamps for 1975-83 280Z and 280ZX. Wire style clamps like originals. Two different sizes of clamps. Choose from 70mm (2.75") or 78mm...
£4.14 650-222PCV hose for Datsun 280Z 1975 to Aug 1976. This hose goes from the air intake boot in front of the throttle body to the metal 3-way connector that attaches to the intake...
£6.62 650-223New vacuum PCV hose that runs from the valve cover elbow over to the 3-way connector on the intake manifold. Hose is approx. 12" long. Will fit Datsun 280Z 1975-76 with fuel...
£36.43 800-447New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£36.43 800-447New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£36.43 800-1409New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£36.43 800-1409New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£11.99 800-1409XNew igntion coil bracket. Will fit 1970-83 Datsun Z cars and 1968-73 510.
£36.43 800-2315New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£36.43 800-2315New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£36.43 800-2316New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£36.43 800-2316New connector for the air flow meter on Datsun 280Z and 280ZX, 1975-83. This is a 7-pin rectangular connector with wire leads. We have tried to match the original wiring as...
£3.31 800-1104/1662-1104- 2 inchAluminum Fiberglass Heat Reflective Adhesive Tape, helps to shield fuel lines, brake lines, wire looms, and more from radiant heat--so it's great for quick "on the go" heat...
£2.48 800-1104/1662-1662- 1.5 inchAluminum Fiberglass Heat Reflective Adhesive Tape, helps to shield fuel lines, brake lines, wire looms, and more from radiant heat--so it's great for quick "on the go" heat...
£3.31 800-1387New cold start valve gasket. This gasket fits under the cold start valve on Datsun 280Z and 280ZX, 1975-83. Will also fit the vacuum port elbow right in front of the cold start...
£5.80 650-243Stainless steel bolt kit for holding the heat shield to the bottom of the intake manifold on Datsun 280Z and 280ZX 1975-83. Includes six SS bolts with wshers.
£5.80 650-243Stainless steel bolt kit for holding the heat shield to the bottom of the intake manifold on Datsun 280Z and 280ZX 1975-83. Includes six SS bolts with wishers.
£5.80 650-246Stainless steel allen head bolts that mount the throttle body to the intake manifold.These bolts will fit on Datsun 280Z and 280ZX, 1975-1983.
£5.80 650-246Stainless steel allen head bolts that mount the throttle body to the intake manifold.These bolts will fit on Datsun 280Z and 280ZX, 1975-1983.
£18.22 200-890New OEM genuine Nissan fuel injector holder for the top of the injector. This part will fit Datsun 280Z and 280ZX, 1975-1983.
£2.48 200-894Oem genuine Nissan fuel injector retainer screw. Two of these requried per injector on Datsun 280Z and 280ZX, 1975-83.
£2.48 200-894Oem genuine Nissan fuel injector retainer screw. Two of these requried per injector on Datsun 280Z and 280ZX, 1975-83.
£1.99 800-1116Fuel injector base screw for Datsun 280Z and 280ZX, 1975-83. Each injector uses two screws so a total of 12 are needed to replace all of them.
£0.83 800-1116Fuel injector base screw for Datsun 280Z and 280ZX, 1975-83. Each injector uses two screws so a total of 12 are needed to replace all of them.
£2,267.06 650-251FAST fuel injection replacement kit for Datsun 280Z and 280ZX (non-turbo) 1975-1983. The latest technology fuel injection control that bolts right up to your 75-83 280Z (non...
£66.24 650-255Conversion bracket for using a GM TPS sensor (0-5V) on the stock fuel injection throttle body of Datsun 280Z and 280ZX, 1975-83. The stock throttle position sensor was basically...
£57.13 800-429New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal when rotated.
£57.13 800-429New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal when rotated.