Toyota 4-piston front brake caliper upgrade for Datsun 240Z, 260z and 280Z, 1970-78. This caliper will bolt up in the stock location and will require a spacer to work with the...
Toyota 4-piston front brake caliper upgrade for Datsun 240Z, 260z and 280Z, 1970-78. This caliper will bolt up in the stock location and will require a spacer to work with the...
Sport slotted and vented front brake rotors for use with Toyota brake calipers on Datsun 240Z, 260Z and 280Z, 1970-78. These are the wider vented rotors that can be used with...
Sport slotted and vented front brake rotors for use with Toyota brake calipers on Datsun 240Z, 260Z and 280Z, 1970-78. These are the wider vented rotors that can be used with...
TPS sensor adaptor for Datsun 280Z and 280ZX throttle bodies. This adaptor will allow the use of a new style Chevrolet TPS on your stock 280Z throttle body. The new sensor is a...
New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal when rotated.
New GM throttle position sensor for use with our FAST fuel injection conversion system. Produces a 0-5V signal when rotated.
New TPS sensor for Datsun 280Z and 280ZX 1975-83. Uses 3-pin square connector. *Note this is the thinner switch. We have seen thick and thin switches on 1975-83 cars. If your...
New TPS sensor for Nissan 300ZX 1984-89 and 200SX 1986-88.
New throttle position sensor (TPS) connector with wiring. This connector will fit 1975-95 Datsun 280Z, 280ZX and 300ZX . This connects right to your stock TPS & will require...
New throttle position sensor (TPS) connector with wiring. This connector will fit 1975-95 Datsun 280Z, 280ZX and 300ZX . This connects right to your stock TPS & will require...
Extension housing bearing for Datsun 5-speed transmission with 72mm O.D. bearing. Not for Turbo (T5) 5-speed. Bore=1.378", Outer Diameter=2.8346", Width=0.6693" InfoNissan...
NEW OEM genuine Nissan 5- speed (FS5W71B) transmission bearing. Manual calls this bearing "counter, over drive shaft bearing". See picture for location. 47mm O.D., 20mm I.D.
New OEM genuine Nissan 5-speed transmission bearing. Manual calls it a "counter front" bearing. 56mm O.D., 22mm I.D. Bearing picture may differ slightly from actual bearing....
Hardware for mounting the transmission crossmember to the body on Datsun 240Z, 260Z and 280Z, 1970-78. These are 14mm grade 10.9 bolts with fine threads. Includes nuts and lock...
Hardware for mounting the transmission crossmember to the body on Datsun 240Z, 260Z and 280Z, 1970-78. These are 14mm grade 10.9 bolts with fine threads. Includes nuts and lock...
New Energy Suspension polyurethane transmission crossmember bushing set for Datsun 240Z, 260Z and 280Z, 1970-1978. These bushings will work with automatic or manual transmission...
New Energy Suspension polyurethane transmission crossmember bushing set for Datsun 240Z, 260Z and 280Z, 1970-1978. These bushings will work with automatic or manual transmission...
New manual transmission (4 & 5 Speed) ball and spring. These manual transmission parts will fit Datsun 240Z, 260Z, 280Z, and 280ZX. If you lost these while rebuilding your...
New driveshaft transmission input slip yoke for use with Nissan 350Z 6-speed transmission, CD009. Choose from 1310 or 1350 U joint style. 30/32 spline, 30 splines with two...
New driveshaft transmission input slip yoke for use with Nissan 350Z 6-speed transmission, CD009. Choose from 1310 or 1350 U joint style. 30/32 spline, 30 splines with two...
New driveshaft transmission input slip yoke with stock Datsun U joint or 1310 series. This part will fit Datsun 240Z, 260Z and 280Z, 1970-78 with automatic and manual...
New driveshaft transmission input slip yoke with stock Datsun U joint or 1310 series. This part will fit Datsun 240Z, 260Z and 280Z, 1970-78 with automatic and manual...