New OEM Genuine NIssan rubber plug. Will fit the wiper wiring hole on 1970-78 Z cars and also for the door on 280ZX 79-83. Fits hole size approx 1.4" (35mm).
New OEM Genuine Nissan rubber plug. Will work for hatch area floor plugs left and right side of the spare tire well. Will also work for the choke cable hole (1970-74 240Z,...
New OEM Nissan thick rubber plug with 15.5mm (5/8") I.D. Fits on the water inlet fitting that goes to the rear of the engine.
New OEM Nissan rubber plug for the hole where the heater hoses would go through the firewall on Datsun 510 1968-73. If deleting the heater these are great thick rubber plugs...
New OEM genuine Nissan rubber hole plug for the hatch to quarter panel jamb area. One on each side of the hatch. These rubber plugs will fit Datsun 240Z, 260Z and 280Z, 1970-78....
New OEM genuine Nissan rubber plug for spare tire area. Early cars only had one plug here and later cars had two plugs. This hole plug will fit Datsun 240Z, 260Z and 280Z,...
Precision's weatherstrip lube significantly reduces friction, thereby reducing the installation force required to assemble parts & fittings. Helps to avoid injuries related...
Rubber toughened adhesive and accelerator for attaching rubber parts to the car with a quick cure time. Place the adhesive on one part and spray the other part with...
Rubber toughened adhesive and accelerator for attaching rubber parts to the car with a quick cure time. Place the adhesive on one part and spray the other part with...
Rubber toughened adhesive and accelerator for attaching rubber parts to the car with a quick cure time. Place the adhesive on one part and spray the other part with...
Rubber toughened adhesive and accelerator for attaching rubber parts to the car with a quick cure time. Place the adhesive on one part and spray the other part with...
New OEM genuine Nissan screw size M5 x 10. This screw is used to retain the inspection light to the fender. *See PT# 650-226 for SS screws
New OEM screw grommet in size M5. Fits in the dash of Datsun Z cars. Fits square hole size of 9mm x 9mm.
New OEM screw grommet in size M5. Fits in the dash of Datsun Z cars. Fits square hole size of 9mm x 9mm.
Original style hex head phillips screw, in yellow zinc finish. Includes built in loose washer. This style was used in many places on vintage Datsun cars. The M6 screws have...
Original style hex head phillips screw, in yellow zinc finish. Includes built in loose washer. This style was used in many places on vintage Datsun cars. The M6 screws have...
Original style hex head phillips screw, in yellow zinc finish. Includes built in loose washer. This style was used in many places on vintage Datsun cars. The M6 screws have...
Original style hex head phillips screw, in yellow zinc finish. Includes built in loose washer. This style was used in many places on vintage Datsun cars. The M6 screws have...
OEM genuine Nissan M6 screw with washer. This screw can be used in many areas on Datsun 240Z, 260Z and 280Z, 1970-78. One of the uses is on the window regulator. 12mm under head...
OEM genuine Nissan M6 screw with washer. This screw can be used in many areas on Datsun 240Z, 260Z and 280Z, 1970-78. One of the uses is on the window regulator. 12mm under head...
OEM genuine Nissan M6 screw with washer. This screw can be used in many areas on Datsun 240Z, 260Z and 280Z, 1970-78. One of the uses is on the window regulator. 12mm under head...
OEM genuine Nissan M6 screw with washer. This screw can be used in many areas on Datsun 240Z, 260Z and 280Z, 1970-78. One of the uses is on the window regulator. 12mm under head...
OEM genuine Nissan M6 screw with washer. This screw can be used in many areas on Datsun 240Z, 260Z and 280Z, 1970-78. One of the uses is on the window regulator. 12mm under head...
OEM genuine Nissan M6 screw with washer. This screw can be used in many areas on Datsun 240Z, 260Z and 280Z, 1970-78. One of the uses is on the window regulator. 12mm under head...