Black short sleeve AS Colour T-shirt with 'Link ECU' design. High Quality screen printing that will not wear off. The back of the T-shirt is plain black. Size 2 XL
More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications,...
Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.
Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors.Includes 2 way Bosch Style Plug, pins and rubber boot
Bosch 2 way plug kit. Useful for a variety of applications. Most commonly paired with Bosch Fuel Injectors. Includes 2 way Bosch Style Plug, pins and rubber boot
Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability.
Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.
Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.
USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for:G4X AtomG4X MonsoonG4+ AtomG4+ KurofuneG4+ Monsoon
Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector. Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead....
2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s.
Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda...
CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices.
Includes 2-pin Deutsch DTM connector kitAluminium and steel weld in mounting bosses available1/8" BSP Thread
Includes Plug Kit - 2 way Bosch Style plug, terminals and bootM12 Thread
Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigger wheel, see related products...
Dual core screen cable for use with trigger signals and knock sensors - 10m per pack
Link's new G4+ external E-throttle (Drive by Wire) module works with Link's G4+ Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a...
Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. Compatible...
Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probeExposed sensing junction for fastest responseIncludes 316 SS adjustable compression fittingStainless...
Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning,...