The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in...
The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of...
This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost...
The Link 5 Bar MAP sensor reads up to 5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4.0 Bar (or 58psi) of boost...
The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 5.5 Bar (or 87psi) of...
5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and...
2.5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and...
0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and...
Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.
Details Includes 2-pin Deutsch DTM connector kitAluminium and steel weld in mounting bosses available1/8" BSP Thread
Includes Plug Kit - 2 way Bosch Style plug, terminals and bootAluminium and steel weld in mounting bosses available (IATBMA & IATBMS)
5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and...
2.5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and...
0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and...
Blanking plugs for unused terminal positions - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.
For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure compatibility with your injectors.
For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a single pack. Please contact us to ensure...
For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance...
For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using injectors with an impedance...
Blanking plugs for unused terminal positions - 20 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors
Black short sleeve AS Colour T-shirt with 'Link ECU' design. High Quality Screen printing that will not wear off. The back of the T-shirt is plain black.
Black short sleeve AS Colour T-shirt with 'Link ECU' design. High Quality Screen printing that will not wear off. The back of the T-shirt is plain black. Size Large.
Black short sleeve AS Colour T-shirt with 'Link ECU' design. High Quality Screen printing that will not wear off. The back of the T-shirt is plain black. Size medium.
Black short sleeve AS Colour T-shirt with 'Link ECU' design. High Quality screen printing that will not wear off. The back of the T-shirt is plain black. Size Extra Large.