Techno Toy Tuning has a nifty setup for the rear of the 240Z, 260Z, and 280Z! Our shop 240Z had a high HP Ford 302 in it and we've always wanted a "BETTER" solution for the CV...
Techno Toy Tuning has a nifty setup for the rear of the 240Z, 260Z, and 280Z! Our shop 240Z had a high HP Ford 302 in it and we've always wanted a "BETTER" solution for the CV...
Many S30 Z owners have been looking to upgrade their front brakes with larger than factory calipers and modern vented brake rotors while still maintaining their classic wheels.
This Front Big Brake Kit is a direct bolt on for the Z cars and features 300MM x 1.25" 2 piece rotor and massive Wilwood Forged Superlight calipers. Choose slotted,...
Our goal has always been to make great sports cars better without upsetting their legendary characteristics. The S30 Z car is great in factory form but the rear suspension...
Many S30 Z owners have been looking to convert their rear brakes from drum to discs while still maintaining their classic wheels. We are proud to introduce our new 240/260/280z...
Our new Z car rear big brake kit is now available! Using a 290MM rotor and a one piece caliper bracket straight from the strut housing to the caliper. Using Wilwood 4 Piston...
Something a little special for the Vintage Z guys! Our new GTX2 Lower Control Arms are now available. These units replace the factory front lower control arms AND caster (TC)...
Our Rear Coilover Conversion for the S30 240Z includes shortened OE strut casings and spindles rebuilt with Koni short stroke shocks. Koni's are adjustable, allowing you to take...
Our Front Coilover Conversion for the S30 240Z includes shortened OE strut casings and spindles rebuilt with Koni short stroke shocks. Koni's are adjustable, allowing you to...
Billet 4 lug front hubs for the 240Z. Machined from solid billet 6061 aluminum and anodized grey for durability. Bolt pattern on the hubs is 4x114.3 (4x4.5") Factory Z bolt pattern
5 lug front hub conversion for the 240Z For our rear end conversion, many people decide to go with 5 lug rear setups. These new hubs for the FRONT allow people running 5 lug on...
Our new Z rear lower control arms come with Prothane bushings on the inboard side, and on the outboard side 3 piece teflon lined 5/8" rod ends with 3/4" shanks. They are...
Fully Fabricated steel lower control arms (No used OEM parts)! Double adjustable hardware (extend or shorten on car, no unbolting) OEM-style ball joints, strongest option, easy...
This Mustache Bar will fit any Z from 240Z to 260Z to 280Z. This mustache bar is specifically designed to hang the R200 Short Nose or R230 Short Nose diff under the car. In...
The wait for fully fabricated S30 suspension is finally over! Introducing our new Evolved Rear Coilovers for the 240Z! This Coilover Conversion includes fully fabricated OEM...
The wait for fully fabricated S30 suspension is finally over! Introducing our new Evolved Front Coilovers for the 240Z! This Coilover Conversion includes fully fabricated OEM...
This Mustache Bar will fit any Z from 240Z to 260Z to 280Z. We make these in the longnose R200 and R180 patterns, so please choose your item carefully.
The quick and easy way to get 5 lug on the back of the Z.Original Z stubshafts machined to 5 x 114.3 bolt pattern (5x4.5")Direct bolt in solution for the rear fo the Z cars.
Our Weld On Coilover Kit is the exact same kit we use on all of our coilover conversions. It is designed for the "do it yourselfer" that has cutting and welding capabilities.
All solid steel construction All hardware plated or powdercoated (The grey stuff is powdercoating) providing a finish tough as nails. Solid 1" steel, single piece arm design,...
Our new Evolved Knuckles for the 240z are absolutely perfect! As many of you know, we have been manufacturing steering arms for vintage Toyotas for over a decade. We've been...
We have designed a front differential mount to replace the factory stamped steel and leather unit for S30's still using an R180/R200 Long Nose Differential!
These are our billet drop mounts for the Z cars. We now have two Dog Bone options available, Billet Aluminum or Powdercoated Steel. The Billet Dogbone is also available by...
For those needing less body roll and flatter handling the Techno Toy Tuning Rear Swaybar is an excellent way to go! Swaybars come with all mouinting hardware, endlinks and...
S30 240Z, 260Z and 280Z transmission mount. This unit replaces type 3 tranny crossmembers in the above diagram. Take a peek under your car to check which one you need as it is...
Die hard L- Series S30 owners we have something special for you! Our Z Type 1 & 2 Transmisssion Crossmember for the Nissan 240SX Transmission can help you properly install a...
S30 240Z, 260Z and 280Z transmission mount. This unit replaces type 1 and type 2 tranny crossmembers in the above diagram. Take a peek under your car to check which one you need...
Die hard L- Series S30 owners we have something special for you! Our Z Type 3 Transmisssion Crossmember for the Nissan 240SX Transmission can help you properly install a KA24...
Factory rubber bushings were never meant to take much abuse and the sloppiness in your suspension can be considered a direct result. Prothane's urethane suspension bushings were...
Looking for a simple solution for adjusting the rear camber and toe on the Z car? Here's the ticket! Made from billet aluminum, anodized grey and using delrin inserts, these...
We now have a direct replacement Ebrake cable for the S30's factory drum brakes! Our replacement unit uses stainless machined pieces and a thick teflon coated cable for smooth...
HyperCo Coilover Springs are the top choice of winning race car drivers and drifters worldwide! Proven in Indy, IMSA, and F1 to perform consistently, season after season.
Meet our new Evolved RCA's for the Datsun 240/260/280Z! Using very clever geometry and hardware, these units can be used as a normal Roll Center Adjuster, Ackermann Adjust Roll...
If you have 240Z hubs, but wish to convert the backside offset to that of the 260Z or 280Z (If you have 260Z or 280Z brakes), then these these hub rings will do the trick....
Replaces those rotted rubber lines on your Z car! These high performance braided brake lines will provide a much more solid pedal feel.
If you are using our camber plates and need a little more height, these riser blocks are the ticket. These gold blocks click into place between the camber plate bearing block...
The Camber Plate Upper Hat System is available for any car using coilovers. It can also be utilized with most other camber plates on the market, including Cusco and Cusco-Clone...
The original steering column on the 240Z includes a rubber "rag joint" between the U-joints. This can cause a vague and un-responsive steering feel. This billet aluminum...
The Z is only going up in value. It can be difficult to stomach cutting and welding a super clean chassis to install camber plates, so we wanted to provide a bolt in option that...
These are our steel weld in camber plates for the 240Z, 260Z and 280Z. Designed with the same profile as the factory upper strut top, you simply cut the factory strut top out,...
Finding replacement bolts for your Z's Rear Lower Control Arm bushing caps is now a lot easier! We've gone ahead and machined brand new ones so that you don't have to put your...
Sold in Pairs. Laser cut steel weld perches for use on DIY coilovers. Weld these to the strut casings as a new perch for your threaded sleeve to sit on. 2" ID for a nice fit...
Urethane rack bushings for the Datsun Z cars. Please choose 240Z or 260/280Z depending on which model you have. These are the ultimate in firm mounting solution for the Z cars,...
For those needing less body roll and flatter handling ST Suspension Sway bars are the best way to go! Available for the Z front in 1" Available for the Z rear in 3/4" Front and...
These are our new High Clearance Outer Tie Rods for the Z cars. We use very strong 5/8" bore rod ends with 3/4" shanks for these parts. The Rod Ends are 3-piece teflon lined to...
Our Z Lift Blocks are the perfect solution for a supension build that has gone wrong. If you've shortened your strut casings or cut your springs and now find that your car is...
Our Fancy Rear Drop Mount Caps for the Z car are a nice billet upgrade over the factory stamped pieces. Sold as Fronts, Rears, or Complete set with all necessary hardware....