This is the spring that attaches the upper fork lever to the throw out bearing sleeve.
This is the spring that attaches the upper fork lever to the throw out bearing sleeve.
The Throw out bearing sleeve sits on the transmission input shaft. The Throw out bearing gets pressed onto the sleeve, and allows the fork slide the sleeve back and forth to...
This is the spring that holds the fork to the pivot ball on the transmission.
Nissan OEM Clutch Pedal Assembly, Manual Transmission MT 2003.
This is the spring that holds the fork to the pivot ball on the transmission.
The Fork Pivots on the Pivot Ball, and allows pressure to be applied to the clutch.
Nissan OEM Clutch Master Cylinder Reservoir Cap.
This Flex Hose is a genuine OEM Nissan part #30855-CD00A and carries a factory warranty.
Genuine Nissan OEM Master to Coupler Firewall Clutch Line Tube.
Nissan OEM Short Transmission Bolt, 55mm.
Replace any old or damaged OEM Transmission Bell Housing Bolts for a Manual Transmission with TORQEN's custom Kit. Kit Includes: - 5x Transmission Bolt - 31377-JL00A- 1x Short...
Nissan OEM Transmission Drain or Filler / Differential Filler Plug. Product # 32103-1MG0BReplaces # 32103-4N21A, 32103-4N211
Nissan OEM Transmission Gear Shifting Insert.
This is a must have upgrade for the 350Z Z/G35 with an upgraded clutch. This will eliminate the mushy pedal feel, that ALL Z's have after installing high clamping force...
These are a slightly upgraded version of the original Technafit clutch line, now wrapped with heat insulation to prevent heat transfer and help keep your clutch fluid temp down.
The Clutch Inspection plate cover is used for visual inspection of the clutch/flywheel area. This plate should always be installed, without it debris and dirt can get into the...