View larger

370z Blitz SBC i-D Spec R Boost Controller

The Sequential Boost Controller i-D III (SBC i-D III) is the latest boost controller offer by BLITZ. this unique boost controller represents the cutting edge in boost controller technology.

More details

£779.99

Part #

Add to wishlist

The SBC i-D III features the same dual solenoid design as the DSBC for maximum boost response and the capability to hold up to 36.75psi (2.5 bar). The SBC i-D III is 1/2 din size and it is compatible with internal actuators and external wastegates.


Boost Unit


    Has four different programmable boost settings. Can display boost in:
        PSI
        Bar
        KPA
        kg/cm2


Boost Gauge and Peak Hold


    This boost controller has a built in boost gauge and peak hold that can be display in both graph and digital form.


Boost Warning and Limiter


   This is a safety function that allows the user to set the amount of boost decrease in the event of any overboost. Warning in visual display and audible warning.


Scramble Boost


    The scramble boost feature allows the user to set an increase or decrease in boost for a desired amount of time.


Manual or Automatic Boost Setting


    The SBC i-D allows the user to set boost both in manual and automatic.


Automatic


   Sets boost directly, just dial in desired boost setting.


Manual


    Sets boost in ration, this setting will give maximum boost response. Recommended for high boost vehicles and large turbo.


Display


    Can display up to 6 different readings, Each reading can be displayed in both digital and graphical form. SBC i-D has the option to display 5 different vehicle readings. Power Meter i-D and SBC Optional harness are needed to display other readings. With Power Meter i-D connected, the SBC i-D can display SPEED and POWER. With SBC Optional Harness connected, the SBC i-D can display different electronic output from the ECU (ie. TPS, water temperature, oil pressure, A/F, injector pulse).


        Boost: Digital and Graphical
        OPT1 / SPEED (Power Meter i-D required to display speed): Digital and Graphic Display
        OPT2 / POWER (Power Meter i-D required to display power): Digital and Graphical Display
        Data 1~3 (SBC Optional harness required): Digital and Graphical Display


Record and Replay


    SBC i-D has the ability to record and replay any information that was displayed on the SBC i-D. The SBC i-D can also replay information on the Power Meter and any of the optional data that is displayed. Replay can be fast forwarded and replayed in 2x and 5x.


Speed Map


   The SBC i-D has the ability to control boost by speed (Power Meter i-D required). This function allows the user to fine tune the boost according to the speed of the vehicle. If Speed Map is set up by the different boost channels, the boost controller will switch channels automatically according to the speed of the vehicle. Speed is transferred from the Power Meter i-D by the infrared connection between the SBC i-D and Power Meter i-D.


Optional Display


    The SBC i-D has the ability to display any electronic outputs from the ECU (SBC Optional Harness required Part #15053). It can read TPS, water temperature, oil pressure, injector pulse, A/F, and etc. The SBC Optional Harness will allow the SBC i-D to display up to 3 different readings, DATA 1~3. Any addition readings can be recorded and replayed.


Add Your Review
close
Rating:
Name:
Text:
  Add review