This CNC machined 6061 aluminum fuel distribution block insures the most direct path for unrestricted flow. The distribution block features three 8AN ORB female ports and one...
Radium Engineering Dynamic Safety Vent (DSV) valves feature advanced tank venting and roll-over protection for fuel cells and gas tanks. The Radium Engineering DSV valves come...
Radium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. The 20-0409 low profile 13.5mm press-fit banjo fitting has a 19.1mm long...
Radium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. The 20-0408 low profile 18.1mm press-fit banjo fitting has a 9.3mm long snout.
Radium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required. 20-0509 Suits Toyota 1JZ VVti Exhaust Side. The 20-0509 low profile 11.8mm...
1pc Clamp, 60mm, Heat Exchanger With engine power levels globally increasing, pump heat is fast becoming an issue in fuel systems. This custom extrusion includes cooling fins...
The vent permits air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed. This allows the tank to breath to avoid pressurization...
The vent permits air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed. This allows the tank to breath to avoid pressurization...
This aluminum CNC machined fitting allows flexibility when plumbing a coolant or fuel system using multiple pumps or fuel rails. It features two -6AN ORB (9/16-18 thread) ports...
When separating two hoses, dry break fittings permit a leak-free disengagement while retaining pressure. Radium dry break couplers use a bayonet style lock that will not leak...
When separating two hoses, dry break fittings permit a leak-free disengagement while retaining pressure. Radium dry break couplers use a bayonet style lock that will not leak...
Radium Engineering Fuel Cell Filler Neck and Cap