R35 Brian Crower Upgrade to 4.45L Stroker KitView larger

R35 Brian Crower Upgrade to 4.45L Stroker Kit

Notes:


- ACL Race Series Bearings are NOT included in this kit. Must use OEM/factory bearings for this application
- 95.5mm Bore x 88.4mm Stroke - 9.606" Block Height

More details

£9,675.60

Part # BC0249


Finance options from £725.67/month with OmniCredit

Add to wishlist

Upgrade to 4.45L Stroker Kit (BC0249) by Brian Crower®. Nissan Vr38Dett - 94.4mm Billet Crank, Hd I Beam Rods (6.496"), Pistons, Balanced. Rod Length: 6.496". The BC stroker kit for the Nissan VR38DETT engine incorporates a 94.4mm stroke, EN30B steel billet crankshaft. Depending on bore size that you decide, the BC kit will take you up to a 4.45L with a safe 100mm bore. The VR38 kit utilizes premium steel billet connecting rods. As usual, each BC kit features custom CP or JE pistons, wrist pins, and full ring pack. Big time horsepower and torque gains. Includes EN30B billet crank, 94.4mm stroke fully balanced, I-beam BC625+ rods (6.496" c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings sold separately.


Features:


- BC EN30B billet steel crankshaft (94.4mm stroke). same material used to make 7000+ HP Top Fuel cranks
- BC 4340 Pro Series I Beam connecting rods w/top-of-the-line ARP Custom Age 625+ bolts
- CP or JE aluminum forged pistons (any bore size, any compression ratio)
- Upgraded 9310 Series tool steel wrists pins come standard
- Ductile iron plasma top rings, tapered 2nd ring, low tension oil rings
- Available as fully system balanced and ready to install or unbalanced (50% deposit required)


Connecting Rods: BC connecting rods are CNC machined from aerospace grade 4340 steel billet, available in your choice of the European influenced H beam or the traditional I beam design (certain applications). All rods feature a deep, double ribbed cap that keeps the big end housing bore true at extended rpm and insures uniform bearing crush, delivering proper clearances for superior oil supply and maximum load carrying capacity. H Beam rods feature a deep radial groove pin bushing and oil holes at 5 and 7 o'clock (the beam acts as a trough), bringing critical lubrication to the critical wrist pin area. I Beam rods feature a oil hole at the 12 o'clock position that keep the pin end bore true at high boost. Available in your choice of ARP2000 fasteners (rated to 210,000 psi) or the ultimate faster, ARP's Custom Age 625+ (rated to 280,000 psi).


Pistons: Choose from the top piston brands available CP or JE in any desired bore size and compression ratio. Both brands make their custom BC stroker pistons from 2618 T6 high tensile strength forged aluminum forgings. These forgings are computer designed for strength and minimum weight. Each piston dia is CNC machined to assure optimal accuracy and superior grain flow in the forging process. 3D modeling software and rigorous Finite Element Analysis insure that your pistons are manufactured to the strongest and lightest part possible for your application. Your custom pistons feature tighter clearances, less noise, better ring seal and overall better durability. Standard features include pin fit, carbon steel wrist pins and spiral locks or rail supports depending on application. Added features include upgraded 9310 alloy wrist pins for reduced flex, lateral gas ports to assist in ring seal, skirt and top coatings and lightweight design.


Brian Crower, Inc. is dedicated to serving the industry with the highest quality internal engine components available at very affordable prices. BC will be out there at events like Formula D, the new Rally Cross series, Time Attack, various drag events, as well as SEMA and PRI shows getting a feel for what's next, whether it's the new Hyundai, Mitsubishi or Scion engine platform.


Connecting Rods: BC connecting rods are CNC machined from aerospace grade 4340 steel billet, available in your choice of the European influenced H beam or the traditional I beam design (certain applications). All rods feature a deep, double ribbed cap that keeps the big end housing bore true at extended rpm and insures uniform bearing crush, delivering proper clearances for superior oil supply and maximum load carrying capacity. H Beam rods feature a deep radial groove pin bushing and oil holes at 5 and 7 o'clock (the beam acts as a trough), bringing critical lubrication to the critical wrist pin area. I Beam rods feature a oil hole at the 12 o'clock position that keep the pin end bore true at high boost. Available in your choice of ARP2000 fasteners (rated to 210,000 psi) or the ultimate faster, ARP's Custom Age 625+ (rated to 280,000 psi).


Pistons: Choose from the top piston brands available CP or JE in any desired bore size and compression ratio. Both brands make their custom BC stroker pistons from 2618 T6 high tensile strength forged aluminum forgings. These forgings are computer designed for strength and minimum weight. Each piston dia is CNC machined to assure optimal accuracy and superior grain flow in the forging process. 3D modeling software and rigorous Finite Element Analysis insure that your pistons are manufactured to the strongest and lightest part possible for your application. Your custom pistons feature tighter clearances, less noise, better ring seal and overall better durability. Standard features include pin fit, carbon steel wrist pins and spiral locks or rail supports depending on application. Added features include upgraded 9310 alloy wrist pins for reduced flex, lateral gas ports to assist in ring seal, skirt and top coatings and lightweight design.


Brian Crower, Inc. is dedicated to serving the industry with the highest quality internal engine components available at very affordable prices. BC will be out there at events like Formula D, the new Rally Cross series, Time Attack, various drag events, as well as SEMA and PRI shows getting a feel for what's next, whether it's the new Hyundai, Mitsubishi or Scion engine platform.


Add Your Review
close
Rating:
Name:
Text:
  Add review