The Derale Shrouded Dual Electric Fan is one of the best cooling options for your drift car and here is why: -High Output, Powerful, Primary cooling fans for maximum power...
Our FDF Mantis Air Fresheners. A circular design with our Mantis logo on them. If your car is looking fresh, you definitely want it smelling fresh as well.
The FDF rear W-brace for the 350z/g35 is made from billet 6061-t6 aluminum. Designed to replace the factory brace/increase rigidity and decrease the weight. It is a direct fit...
We have developed front adjustable control arms for the 350z/g35 chassis to fill a void in the market. These offer lightweight Alloy steel construction, and Uniball bearings at...
FDF Rear toe gain bracket for the 350z/G35 There are 2 options for this budget upgrade to be done on your 350Z/G35
-Comes in pair -Universal fit -High quality wrap sticker
The FDF Axle spacers are designed to prevent axle failure on lower or higher horsepower cars. The idea is to maintain the factory axle length, and have full CV engagement. These...
Our new Mantis Angle apparel is now ready to order. This sleek design is a combination of our motto "We Race What We Build" on the back and our "Mantis Angle" design on the...
Our new Mantis Angle apparel is now ready to order. This sleek design is a combination of our motto "We Race What We Build" on the back and our "Mantis Angle" design on the...
Our new Mantis Angle apparel is now ready to order. This sleek design is a combination of our motto "We Race What We Build" on the back and our "Mantis Angle" design on the...
Adjustable sway bar links These Adjustable links are a high quality Chromoly female and male rod end. They are length adjustable and a universal way to connect your sway.
Replacement lower control arm for mantis angle kit. Compatible Model Nissan 350zInfiniti G35
Replacement lower control arm for mantis angle kit. Compatible Model Nissan 350zInfiniti G35
Replacement lower control arm for mantis angle kit. Compatible Model Nissan 350zInfiniti G35
Replacement lower control arm for mantis angle kit. Compatible Model Nissan 350zInfiniti G35
Replacement tension arm for s13,s14,s15 mantis kit.
Replacement tension arm for s13,s14,s15 mantis kit.
Replacement rack bolt M18x1.0 Compatible with : Nissan 370zInfiniti G37
Replacement rack bolt M16x1.0 Compatible with : Nissan 350zNissan S-chassis (S13, S14, S15)Infiniti G35
FDF Rear Grip kit for Z33/Z34 chassis is here -Maximizing grip and minimizing camber gain by redesigning the knuckles attachment points and using relocation brackets on the...
FDF Rear Grip kit for Z33/Z34 chassis is here -Maximizing grip and minimizing camber gain by redesigning the knuckles attachment points and using relocation brackets on the...
The Billet fender brace for the S14 was developed after years of drifting with an schassis, and for a good reason. During our testing we noticed extensive flex in the front...
Aluminum Dual Caliper Brackets for all S-Chassis, R-Chassis and Z-Chassis. For use with Z32 dual piston caliper and stock rotor (same as r32,r33,r34, and jdm s14/s15) Comes with...
Introducing the Grassroots Performance line of Street & Track Coilovers for a variety of makes and models. This is an affordable set of coilovers tested on both daily use...
Introducing the Grassroots Performance line of Street & Track Coilovers for a variety of makes and models. This is an affordable set of coilovers tested on both daily use...
The FDF 370Z/G37 Diff Brace is the most relevant product available for stabilizing the rear end of the Z/G chassis. *PLEASE NOTE* Does not fit UK Spec 2014+ 370z Nismo's
The FDF 370Z/G37 Diff Brace is the most relevant product available for stabilizing the rear end of the Z/G chassis.
The Mini mantis kit is the most affordable angle option for the 370Z/G37, giving the chassis around 58 degrees of angle, with zero Ackerman. (Other Ackerman options are available)
The Mini mantis kit is the most affordable angle option for the 370Z/G37, giving the chassis around 58 degrees of angle, with zero Ackerman. (Other Ackerman options are available)
240sx Heel Plates. -Covers entire floor panel under the pedals to the front of the seat. -Provides excellent grip with inverted flared holes rows. -Cut from 6061 aluminum, so no...
240sx Heel Plates. -Covers entire floor panel under the pedals to the front of the seat. -Provides excellent grip with inverted flared holes rows. -Cut from 6061 aluminum, so no...
240sx Heel Plates. -Covers entire floor panel under the pedals to the front of the seat. -Provides excellent grip with inverted flared holes rows. -Cut from 6061 aluminum, so no...
The Pyrotect Ultra-Mini is the perfect entry-level racing seat. The 18lb. FIA 8855-1999 Approved Ultra-Mini racing seat combines comfort, performance, and safety at an...
Pyrotect Elite race seat is designed for the racer looking for the best safety in the industry with the official FIA 8855-1999 approval rating, the 30lb. Elite race seat...
The Billet Mantis Kit for the S-chassis is a fully CNC machined kit, using 7075 Aluminum and then hard anodized "mantis green" with the upgraded 350z bearing option.
The Billet Mantis Kit for the S-chassis is a fully CNC machined kit, using 7075 Aluminum and then hard anodized "mantis green" with the upgraded 350z bearing option.
The Billet Mantis Kit for the S-chassis is a fully CNC machined kit, using 7075 Aluminum and then hard anodized "mantis green" with the upgraded 350z bearing option.
FDF Rear Grip Kit: -Machined Billet Aluminum-Multiple options for Calipers available (Wilwood, R-chassis, 350,370, etc)-7.5lbs per knuckle
FDF Rear Grip Kit: -Machined Billet Aluminum-Multiple options for Calipers available (Wilwood, R-chassis, 350,370, etc)-7.5lbs per knuckle
FDF Rear Grip Kit: -Machined Billet Aluminum-Multiple options for Calipers available (Wilwood, R-chassis, 350,370, etc)-7.5lbs per knuckle
FDF Rear Grip Kit: -Machined Billet Aluminum-Multiple options for Calipers available (Wilwood, R-chassis, 350,370, etc)-7.5lbs per knuckle
FDF Rear Grip Kit: -Machined Billet Aluminum-Multiple options for Calipers available (Wilwood, R-chassis, 350,370, etc)-7.5lbs per knuckle
FDF Rear Grip Kit: -Machined Billet Aluminum-Multiple options for Calipers available (Wilwood, R-chassis, 350,370, etc)-7.5lbs per knuckle
Machined from 6061-T6 aluminum is our Billet adjustable splitter rods, these are lightweight, easy to install and even easier to adjust. Use these to support and/or pitch your...
Machined from 6061-T6 aluminum is our Billet adjustable splitter rods, these are lightweight, easy to install and even easier to adjust. Use these to support and/or pitch your...
Machined from 6061-T6 aluminum is our Billet adjustable splitter rods, these are lightweight, easy to install and even easier to adjust. Use these to support and/or pitch your...
Machined from 6061-T6 aluminum is our Billet adjustable splitter rods, these are lightweight, easy to install and even easier to adjust. Use these to support and/or pitch your...